 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Transistors 2SC1509 Silicon NPN epitaxial planar type For low-frequency driver amplification Complementary to 2SA0777 (2SA777) Features * High collector-emitter voltage (Base open) VCEO * Optimum for the driver stage of a low-frequency and 25 W to 30 W output amplifier 0.70.1 Unit: mm 5.90.2 4.90.2 Absolute Maximum Ratings Ta = 25C Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector current Peak collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Rating 80 80 5 0.5 1 750 150 -55 to +150 Unit V V V A A mW C C 0.45+0.2 -0.1 (1.27) 13.50.5 0.45+0.2 -0.1 (1.27) 123 1: Emitter 2: Collector 3: Base EIAJ: SC-51 2.540.15 TO-92L-A1 Package (3.2) Electrical Characteristics Ta = 25C 3C Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector-base cutoff current (Emitter open) Forward current transfer ratio Symbol VCBO VCEO VEBO ICBO hFE1 * hFE2 Collector-emitter saturation voltage Base-emitter saturation voltage Transition frequency Collector output capacitance (Common base, input open circuited) VCE(sat) VBE(sat) fT Cob Conditions IC = 10 A, IE = 0 IC = 100 A, IB = 0 IE = 10 A, IC = 0 VCB = 20 V, IE = 0 VCE = 10 V, IC = 150 mA VCE = 5 V, IC = 500 mA IC = 300 mA, IB = 30 mA IC = 300 mA, IB = 30 mA VCB = 10 V, IE = -50 mA, f = 200 MHz VCB = 10 V, IE = 0, f = 1 MHz 130 50 100 0.2 0.85 120 11 20 0.4 1.2 Min 80 80 5 0.1 330 Typ Max Unit V V V A V V MHz pF Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Rank classification Rank hFE1 R 130 to 220 S 185 to 330 Note) The part number in the parenthesis shows conventional part number. Publication date: November 2002 SJC00106BED 0.7+0.3 -0.2 8.60.2 1 2SC1509 PC Ta 1.2 1.2 IC VCE Ta = 25C IB = 10 mA IC I B 1.2 VCE = 10 V Ta = 25C 1.0 Collector power dissipation PC (W) 1.0 1.0 Collector current IC (A) 0.8 0.8 Collector current IC (A) 9 mA 8 mA 7 mA 6 mA 5 mA 0.8 0.6 0.6 4 mA 3 mA 0.6 0.4 0.4 2 mA 0.2 1 mA 0.4 0.2 0.2 0 0 40 80 120 160 0 0 2 4 6 8 10 0 0 2 4 6 8 10 Ambient temperature Ta (C) Collector-emitter voltage VCE (V) Base current IB (mA) VCE(sat) IC Collector-emitter saturation voltage VCE(sat) (V) 10 VBE(sat) IC 100 hFE IC 300 VCE = 10 V Base-emitter saturation voltage VBE(sat) (V) IC / IB = 10 IC / IB = 10 1 10 Forward current transfer ratio hFE 250 Ta = 75C 25C 150 -25C 200 Ta = 75C 0.1 25C -25C 25C 1 Ta = -25C 75C 100 0.01 0.1 50 0.001 1 10 100 1 000 0.01 0 1 10 100 1 000 1 10 100 1 000 Collector current IC (mA) Collector current IC (mA) Collector current IC (mA) fT I E Collector output capacitance C (pF) (Common base, input open circuited) ob 200 180 VCB = 10 V Ta = 25C 50 Cob VCB IE = 0 f = 1 MHz Ta = 25C ICBO Ta 104 VCB = 20 V Transition frequency fT (MHz) 160 140 120 100 80 60 40 20 0 -1 -10 -100 40 103 30 ICBO (Ta) ICBO (Ta = 25C) 1 10 100 102 20 10 10 0 1 0 60 120 180 Emitter current IE (mA) Collector-base voltage VCB (V) Ambient temperature Ta (C) 2 SJC00106BED 2SC1509 ICEO Ta 105 VCE = 10 V Safe operation area 10 Single pulse Ta = 25C ICP IC t=1s t = 10 ms 104 103 Collector current IC (A) 1 ICEO (Ta) ICEO (Ta = 25C) DC 0.1 102 0.01 10 1 0 20 40 60 80 100 120 140 0.001 0.1 1 10 100 Ambient temperature Ta (C) Collector-emitter voltage VCE (V) SJC00106BED 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL |
Price & Availability of 2SC1509
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |